MK-F12 Dry Ice Low Fog Machine
As a guaranteed crowd-pleaser for special events, MK-F12 dry ice smoke machine create low lying cloud effects for weddings, parties and Halloween festivals, it always could bring you unexpected effects.
MK-F12 dry ice smoke machine is a professional dry ice machine that produces thick, white fog that hugs the floor and dissipates without rising.
You will never worry about the stage will become cloudy and mess when using the MK-F12 dry ice smoke machine.
- metal material body
- adjustable multi-level control arm
- much light, easy to carry on and operate
- the temperature sensor will automatically shut off heaters for adding safety
|Voltage:||AC110V -220V, 60Hz /50Hz|
|Max Power:||220V 6000W / 110V 4000W|
|Heat-up time:||6000W (20-25 mins) / 4000W (35-40 mins)|
|Packing Size (Carton):||66x57x60cm|
|Packing Option:||Normal Carton / Flycase (Optional with higher cost)|
Here's all the little things you care about.
This powerful smoke machine accepts up to 12KG(26 pounds) dry ice and 19L(5 gallons) hot water to provide 6 minutes of run time.
Output and flow are easily controlled, thanks to an adjustable multi-level control arm.
A high setting gives you the maximum run time, and a low setting helps you fill a room or venue in a hurry.
When you set the output of 50%, it could last 10 minutes, and run 6 minutes of 100% continuous output.
MK-F12 dry ice smoke machine standard is 6000W powerin220V and 4000W power in 110V.
Like the USA, under 110 voltage, if we using dual heaters of 6000W, the current is around 55amp, which overwhelms the most capacity.
The dual heater allows for faster heat-up and recycles running time, with a single heater, it takes 35 minutes to warm up the water, and 18 minutes if you use the dual heater.
Comparing with old version low fog machine, which is the metal material body, MK-F12 dry ice smoke machine, it’s a body with injection molding, shaped in one time, it is sealed well, it won’t have leak problems, which added the safety when you use MK-F12 dry ice smoke machine.
Also, the weight of the MK-F12 dry ice smoke machine is much light, easy to carry on and operate, and the body not like steel, thus never get rusty.
The heater that we use for MK-F12 dry ice smoke machine is stainless material, it makes machine longer lifetime, same as the sink to load the dry ice.
When you use MK-F12 dry ice smoke machine, you will notice that low water and temperature sensors will automatically shut off heaters for adding safety.
If you are a freshman user with MK-F12 dry ice smoke machine, you need to be careful when adding the dry ice into the sink, because dry ice is solid CO2 dioxide.
It will turn into steam when the temperature goes up, in the meantime, it will absorb the heating element, so you need to put on gloves to prevent burning your skin when taking the dry ice.
Some clients always wonder about the difference between MK-F12 dry ice smoke machine and water-based low fog machine, you might have the same doubt also.
To put in this way, MK-F12 dry ice smoke machine is suitable for both indoor and outdoor venue, while water-based low fog machine could only apply with indoor events, because it’s fog is mixed with water, easily rising when running into the wind.
MK-F12 dry ice smoke machine output is much strong, and could only last in few minutes, as for waterbased low fog, with 2L heavy fog liquid, it can last for 2 hours.
So basically, it depends on your specific requirements.
All in all, MK-F12 dry ice smoke machine is highly recommended for your choice.
- Please handle the MOKA SFX Fog Machine by a professional person only.
- Use the device in the correct direction, vertical standing / vertical hanging (based on the different machines).
- Smoking near the machine is prohibited.
- Do not place the machine in a rainy and humid environment.
We support all the available way of Internation Shipping, as listed below:
1) By Express: FEDEX / DHL / UPS
2) By Plane + Delivery to Door
3) By Train + Delivery to Door
4) By Sea + Delivery to Door
Some of the above shipping methods we can do DDP, so you can avoid the handling of tax and save cost.
As the Unit charge for the different countries is different, pls contact us to check the exact freight offer.
1) For entire product is a 1-year Warranty.
2) After 1-year, the component cost will be charged when replacement needed.
Lots of SFX items made by China manufacturer are lack of the critical point: “Details”. But you will find an elegance arrangement product line in us, as we believe that only details will speak out for our difference to the others.
Complete Guide for MK-F09A Fog Machine
If you have ever organized a wedding, live performance, or just a good old house party, then you know how important a good party atmosphere is. A good party must have mood, liveliness, and excitement; MOKA SFX MK-F12 knows how to put a smile on your face. Who wants unhappy celebrators, right?
But sometimes, when the music just doesn’t cut it anymore, or the party is in its infancy, maybe the setting looks dull, you need a little something extra. Something that can bring a party back to life – something that can spring and jolt partygoers awake. Something like the MK-F12 dry ice machine!
What is the MK-F12 Dry Ice Smoke Machine?
MOKA SFX’s MK-F12 dry ice smoke machine is a magnificent dry ice machine that emits low-lying, thick, and cloudy-white fog that floats on the floor, creating a heavenly effect as if you’re high up in the clouds dancing, perfect for any wedding! Of course, this isn’t the only effect the MK-F12 dry ice machine is capable of.
The MK-F12 is a highly versatile machine, making it just as effective if you desire to create a spooky, Halloween atmosphere for your event or perhaps give off a feel of mysticism or magic to your audience. Anything is possible with the MK-F12.
The fog also dissipates without rising, which is a great bonus since you will never have to worry about the stage becoming a cloudy mess when using the MK-F12 dry ice fog machine. How convenient!
How the MK-F12 Dry Ice Smoke Machine Operates
MOKA SFX MK-F12 dry ice machine voltage ranges from AC110V to 220V or from 50Hz to 60Hz. It has the power of 4000 – 6000W. MK-F12 takes about 18 min to get heat up. The electronic heat power of the MK-F12 dry ice machine is 70℃~80℃.
MOKA SFX’s product MK-F12 dry ice machine’s water consumption capacity is 19 liters (top waterline). Its maximum continuous output is 4~5min, and full output coverage is 150~200㎡. MOKA SFX MK-F12 dry ice machine Weighs 22kg.
How MK-F12 dry ice machine Works
When the water inside the MK-F12 dry fog machine is heated and dry ice is deposited into the warm water, the dry ice undergoes a state of getting changed from solid to gas. This process, known as sublimation, results in the fog you see. And, this is how our MK-F12 dry ice machine adds beauty to your events!
Why You Should Use the MK-F12 Dry Ice Machine
A useful feature of the MK-F12 dry ice machine is that it allows you to change the heating rate and therefore changes the intensity of the fog – excellent for monitoring the distribution of fog in a venue!
This feature again demonstrates how versatile the MK-F12 is. Low output is an appropriate option for prolonged usage and a high output being perfect should you find yourself needing to fill a room or venue in a hurry.
Also, the MK-F12 dry ice smoke machine utilizes injection molding for its body, unlike the previous version of the fog machine that had a metallic body. This new and improved smoke machine not only radiates premium through its superior build quality, but functionality is enhanced through a tighter seal, hence eliminating leakage and your concerns with it.
MOKA SFX MK-F12 dry ice machine’s build is also very portable at only 22kg product weight, allowing for efficient transport and handling – you don’t need big muscles to lift this fog monster!
The lying dry ice fog machine also has a temperature sensor that will automatically turn off the heater if water and temperature reach program temperature. This increases automation and safety to people who are using it.
An adjustable multi-level control arm is also present, allowing direct control over output and flow – perfect for cascading fog! The heater and heatsink we use for the MK-F12 dry ice smoke machine is stainless steel, a durable and high-quality material that further enhances build quality.
Because the MK-F12 is a dry ice machine, there are no moving parts or overly complicated components, leading to a more robust and effective solution that is easy to operate. Just be careful when dispensing dry ice into the sink since dry ice is solid carbon dioxide and can lead to skin burns if proper protection is not taken.
If somehow a malfunction occurs (they are extremely rare, but they can happen), rest assured – all MOKA SFX equipment have a 12 Month warranty period. Even in the unlikely event, a defect in the dry ice machine is present, and our experts cover you.
Our friendly 24/7 customer service is also there to assist you if anything wrong or unexpected happens to your product. We take customer satisfaction seriously, and we will be there to help you; should you need it, every step of the way.
With a max output coverage of up to 200m2, the MK-F12 dry ice smoke machine is well-suited to perform in any environment, whether it be a small house or a large wedding hall. Either it’s an outdoor venue, nightclub, or even a large stage for rock stars and bands to develop their stage presence so they can captivate their audiences.
Nothing is off-limits for the MK-F12 dry ice smoke machine, and we’re certain that whether you are a DJ, wedding company, large-scale outdoor event organizer, music festival organizer, or simply someone looking to throw that Friday night house party, you are guaranteed to have a good show using our dry ice machine.
How the MK-F12 Dry Ice Smoke Machine Differs from the Competition
Unlike traditional water-based low fog machines, which can only be used for indoor venues, the MK-F12 dry ice smoke machine can be used for indoor and outdoor venues.
It is because dry ice fog sinks to the floor compared to water-based fog, which rises when experiencing contact with the wind. Dry ice fog machines enable a true low-lying effect that is reliable and consistent every time. As an organizer, you have enough to worry about – saving you the headache of wondering if those winds will sweep your fog away is one less thing to worry about!
The MK-F12 dry ice machine also has a far, far superior output to water-based low fog machines, although admittedly, water-based low fog machines can operate longer, up to 2 hours.
So, unless you have an indoor venue and need long-lasting but low-intensity fog, you should always go with the MK-F12 dry ice machine, as you and your celebrators will definitely be made aware of its powerful, high-intensity, and thick fog that is sure to get the party started!
Growing Demand in an Emerging Market
The day parties and live events stop happening is the daily demand for this product will cease to exist. So basically never. One quick glance at a professional wedding, music event, or an extravagant party, and you will notice a lying dry ice fog machine.
There’s a reason so many people use MK-F12 dry ice machines or other confetti machines: they are known as the “mood” or “atmosphere” of a party. You can have flashy lights, loud music, confetti flying everywhere, but if there’s no fog, there’s no cloudy atmosphere, no enchanting entrance. Party gear all complement one another and gel together to create the best event experience for the audience, the performers, and the organizers who make it all happen.
For this reason, there is really no reason not to have the MK-F12 dry ice machine at your party or event, as it only enhances the party and helps other equipments like party lights stand out more.
Imagine Halloween or jump scare houses without low-lying, dry ice fog. How about a wedding? A stage, theatre, and dancefloor all missing that thick, cloudy fog. It just doesn’t feel right. Theatres and weddings need low-lying fog to create an atmosphere. Dancefloors, nightclubs, and stages need the low-lying fog to bring life to a party. It would be best to have the MK-F12 dry ice machine at your party or event to make it happen.
To prove that the MK-F12 dry ice machine means business, it has received 3 certificates of compliance. As a leading FX machine manufacturer in China, all MOKA SFX products have approved CE/ROHS/FCC certification. The CE mark indicates that the product has conformed with health, safety, and environmental protection requirements for products sold within the European Economic Area.
Compliance with the Restriction of Hazardous Substances Directive (RoHS) has also been achieved, which means the dry ice machine does not contain lead, mercury, or other toxic substances. As a result, the MK-F12 dry ice machine is safer and eco-friendly.
Lastly, the US FCC certification simply means the product has been authorized to sell in the US.
The fact that the MK-F12 dry ice smoke machine has met all legal requirements and has been greenlit by the EEA demonstrates that the product has solid manufacturing set in place and is secure for general use to the public.
It also shows a global demand, as customers buy the product from the US, EU, and China. It’s as popular as the parties you organize!
How to Maintain Your MK-F12 Dry Ice Machine
Just like any product, if you want to get the best value for your money, you need to take care of your MK-F12 dry ice machine and ensure proper maintenance.
- Check that there is no liquid still present in the machine after use – this way, the machine won’t be clogged the next time it needs to be used.
- Also, clean the heatsink to make sure no debris is interfering with the healing process.
- In any case, make sure to read the instruction manual, specifically the section on maintenance.
Factors to Consider when Choosing the Right Fog Machine
Although the MK-F12 dry ice machine is exceptional, no fog machine is a one-size-fits-all solution. You may find yourself in a situation where a different type of fog machine is more suitable for your needs. To help you decide, we have compiled a list of criteria to help you make the right purchase. It can help you to decide which of the MOKA SFX product suits best your need!
Type of Venue
Is the venue indoors or outdoors? While the MK-F12 dry ice machine has the luxury of being useable both indoors and outdoors, not all fog machines can share MK-F12’s versatility. Consider this a plus.
Size of Venue
The MK-F12 dry ice machine has the most powerful output coverage of any current MOKA SFX fog machine, reaching an almost maximum of 200m2. This makes it the best option for large venues. The MK-F13 3500W Dry Ice Fog Machine covers a high output of 100m2, making it specialized for smaller and medium venues.
Max Continuous Output
If all you care about is a set-and-forget fog machine that will disperse fog for a long time, you will look for a water-based fog machine like the MK-F18 3000W Single-head and Double-head Waterbase Fog Machine. This fog machine can last for about 1 hour, which is 10x longer than the MK-F12 dry ice machine. Note that water-based fog machines are most effective indoors.
Another factor for a longer fog duration is tank size: the larger the tank, the longer the machine emits fog. The MK-F18 3000W Single-head and Double-head Waterbase Fog Machine is a large beast with a hefty tank – rest assured, this high-power water fog machine will keep the fog swirling for a while.
If you just want raw power to create the biggest, thickest, and most acute fog, then the MK-F12 dry ice machine already covers it with its monstrous 6000W power supply, higher than any other MOKA SFX fog machine. However, if you’d like a more flashy and explosive fog, the MOKA H-F01 Super Jet Fog Machine will make your audience scream with excitement.
If efficiency comes to mind, you need a fog machine that has a fast warm-up time; no one likes waiting hours or worse, keeping their guests waiting before they can use their fog machine.
While it’s still best to charge beforehand, these fog machines take a minimal amount of time before being available for use, allowing a faster skip of the boring waiting-to-charge part so you can get the party started faster. Besides, maybe you forgot to charge beforehand – it happens to the best of us. Either way, your guests will thank you for it.
The MK-F12 dry ice machine has a heat-up time of 20-25 minutes, which is respectable, although there are better options. The MK-F21 LED Fog Machine has a warm-up time of 6 mins! That’s 3x faster! You can go off and do something, and when you’re back, the fog machine is ready to go.
However, if you’re looking for the absolute fastest, most hassle-free fog machine, look no further than the MK-F20 Pro Morning Haze Machine. This lightning bolt has a warm-up time of 30 seconds! 30 seconds! If you’ve ever been stressed for time and need something that just works, the MK-F20 Pro Morning Haze Machine is the perfect back-up plan – the best panic button you’ll ever need!
Whether you like DMX512, remote control, wired control, manual, or standard panel, you need a control type. The MK-F12 dry ice machine has electronic temperature control, which means the dry ice machine regulates itself, so you don’t have to! Focus on the event, and the MK-F12 will handle the rest.
Flashing lights, who doesn’t like flashing lights? The MK-F19 1500W LED Multi Fog Machine has 12pcs x3W LED lights that will certainly add flair to your celebration.
We at MOKA SFX are very conscious of the importance of price when selecting a product. That is why we have created a range of products to accommodate every customer, from the budget-friendly to those willing to pay more for the industry standard.
The MK-F13 3500W Dry Ice Fog Machine is the best value-for-money for those just looking for a fog machine that specializes in small and medium venues, making it the perfect option for those looking to throw that Friday night house party or DJ live events.
On the other hand, the MK-F12 dry ice smoke machine is our top pick for a reason: it’s the ideal mix of power, innovation, quality, and versatility, all for an affordable price. This is not just our best dry ice fog machine; this is our best fog machine in general – for the value you’re getting; this is an absolute deal!
When all’s been said and done, there’s only one lying dry ice fog machine that floats its way to the top. The MK-F12 dry ice machine has demonstrated that it is superior to its predecessor and has become the new standard in Fog FX.
When you consider how dry ice fog sinks to the floor instead of rising, how MK-F12’s raw power creates the thickest fog with the most extensive coverage and the versatility of maintaining the same effect both indoors and outdoors, it becomes hard to beat. Even if something goes wrong despite all the certifications, the 12-month warranty and 24/7 customer support will be there to assure that you are satisfied with your product, as every customer should.
Whether you’re a wedding organizer, music festival organizer, outdoor venue organizer, a musician looking to take their stage performance to the next level, a DJ making the crowd go wild, a ghost wanting to make Halloween scarier, or just a person looking to add some cool fog for that house party, everyone has something to gain from the MK-F12 dry ice fog machine.
So go on, get yourself the best dry ice machine on the market and watch your partygoers swirl like the fog beneath their feet. Make your party come alive!